* 2000 W continuous program power capacity * 100 mm (4 in) copper voice coil * 35 - 1000 Hz response * 97 dB sensitivity * Aluminium demodulating ring allows a very low distortion figure * Double silicone spider w/optimized compliance * Ventilated voice coil gap for reduced power compression * Nominal Diameter 460 (18) mm (in)* Nominal Impedance (1) 8 Ohm* Minimum Impedence 6.2 Ohm* Nominal Power Handling (2) 1000 W* Continuous Power Handling (3) 2000 W* Sensitivity (1W/1m) (4) 97 dB* Frequency Range 35 - 1000 Hz* Voice Coil Diameter 100 (4) mm (in)* Winding Material Copper* Former Material Glass Fibre* Winding Depth 25 (1) mm (in)* Magnetic Gap Depth 12 (1/2) mm (in)* Flux Density 1.1 T* Thiele & Small Parameters* Fs 34 Hz* Re 5.1 Ohm* Qes 0.37* Qms 7.2* Qts 0.35* Vas 212 (7.5) dm3 (ft3)* Sd 1210 (187.6) cm2 (in2)* Eta Zero 2.2 %* Xmax +/- 9 mm* Xvar +/- 11 mm* Mms 209 g* Bl 25.5 Txm* Le 1.6 mHMounting & Shipping Info* Overall Diameter 460 mm (18 in)* Bolt Circle Diameter 440 mm (17.3 in)* Baffle Cutout Diameter 422 mm (16.6 in)* Depth 209 mm (8.2 in)* Flange & Gasket Thickness 16 mm (5/8 in)* Net Weight 13 kg (28.6 lb)* Shipping Weight 14.4 kg (31.7 lb)* Shipping Box 500x500x250 mm, (19.7x19.7x9.8 in)(1) For different impedances, please ask.(2) 2 hours test made w/continuous pink noise signal (6 dB crest factor).Power calculated on rated minimum impedance.(3) Power on Continuous Program is defined as 3 dB greater than the Nominal rating.(4) Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
Quick Info and Policies:
- Same day shipping on most orders.
- 30 day defective item return policy.
- Low flat rate shipping charges.
- 45 day refund return policy.
- 7%% sales tax applies to NJ residents only.
- Security encryption to protect customer data.
THE PRICE BELOW IS NOT THE ACTUAL PRICE OF THIS ITEM. The actual price is LOWER! The manufacturer of this item has a Minimum Advertised Price (MAP) policy that we adhere to. In other words, we cannot advertise this product at a price lower than the MAP set by the manufacturer. However, we can ultimately sell the product at any price that we choose. Since we are a high volume dealer and are able to maintain our overhead costs low, our actual prices are always lower than manufacturer MAP prices (many times, MUCH LOWER). You can e-mail us at Sales@BSless.com or call us for actual pricing. When e-mailing or calling, please be sure to note the item code located to the left of the price. We apologize for any inconvenience.
|
