The Electro-Voice -TM EVID FM6.2 loudspeaker system is a complete two-way in-wall loudspeaker package. The package consists of a bezel assembly, grille, rear enclosure, 6.5” two-way loudspeaker coupled with a 6.5” passive radiator and an internal line-matching transformer. The loudspeaker features 6.5” low-frequency cone and high-temperature voice-coil assembly along with a 6.5” long excursion passive radiator and titanium coated dome tweeter. The EVID FM6.2 loudspeaker utilizes a crossover network, centered at 3,300 Hz, that provides 16-dBper- octave tweeter protection outside of its operating range. In addition the FM6.2 features a comprehensive protection circuit to shield the woofer and tweeter drivers from excessive power levels.The FM6.2 utilizes a transformer that offers a selection of 7.5, 15, 30, or 60 watts delivered to the loudspeaker system using either 70-V or 100-V lines. The wattage is selected via a convenient switch on the front baffle. The unit can also be operated as an 8-ohm speaker via the same front panel selector switch.The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel is constructed from heat resistant ABS.The rear enclosure is constructed from zinc-plated, steel. The rear enclosure provides an optimum internal volume, ensuring extended lowfrequency performance. It is constructed from heavy-gauge, rugged steel. The steel rear enclosure was optimized using FEA to virtually eliminate panel resonance. The entire enclosure is less than 4” deep providing an easy installation into nearly any tight wall or ceiling space.A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker and provides pass through to additional speakers. FM6.2 loudspeakers provide wide dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.Freq. Response (-3 dB): 60 Hz - 20 kHzFreq. Range (-10 dB): 52 Hz - 20 kHzAxial Sensitivity: 90 dB (SPL 1W/1m)Impedance: 8 ohms nominal (transformer bypass)Crossover Frequency: 3.3 kHzRec. Highpass Frequency: 60 Hz* HF Transducer: 1 in. (25.4 mm)* LF Transducer:* Passive Radiator:* 6.5 in. (165.1 mm)* 6.5 in. (165.1 mm)* Transformer Taps: 70V: 7.5, 15, 30, or 60W* 100V: 15, 30, or 60W* Bypass: 8 ohms nominal* Connectors: 4 pin phoenix style terminals* Enclosure Material: Baffle: UL 94V-O rated ABS* Backcan: Zinc plated steel* Grille: Perforated powdercoated steel with safety tether* Mounting System: Integrated toggle anchors* Support Hardware: Cutout template, Paint shield* Dimensions: 465.4mm x 256.4mm x 100.3mm* (18.32” x 10.09” x 3.95”)* Net Weight (Each): 5.8 kg (12.7 lb)* Shipping Weight (Pair): 12.9 kg (28.4 lb)
Quick Info and Policies:
- Same day shipping on most orders.
- 30 day defective item return policy.
- Low flat rate shipping charges.
- 45 day refund return policy.
- 7%% sales tax applies to NJ residents only.
- Security encryption to protect customer data.
THE PRICE BELOW IS NOT THE ACTUAL PRICE OF THIS ITEM. The actual price is LOWER! The manufacturer of this item has a Minimum Advertised Price (MAP) policy that we adhere to. In other words, we cannot advertise this product at a price lower than the MAP set by the manufacturer. However, we can ultimately sell the product at any price that we choose. Since we are a high volume dealer and are able to maintain our overhead costs low, our actual prices are always lower than manufacturer MAP prices (many times, MUCH LOWER). You can e-mail us at Sales@BSless.com or call us for actual pricing. When e-mailing or calling, please be sure to note the item code located to the left of the price. We apologize for any inconvenience.
|
