* DVX3150 15” LF Transducer w/Forced Air Cooling
* ND2 2” Voice Coil, 1” Exit Neodymium Compression Driver
* 90° x 50° Coverage Pattern
* 600W Continuous (2400W) PowerHandling
* High Sensitivity, 132 dB Maximum SPL
* Adjustable Monitor Angle (45° or 55°)
* 3 Anchor Plates for Single Stud Fittings & 10 Integral Suspension Points
* Available in Black or White
* Passive/Biamp Selectable
The Electro-Voice® Zx5 is the new standard of no compromise audio
performance & versatility in a simple to use, compact package.
At its heart are the transducers. First is the DVX3150 high
performance low frequency transducer. EV used advanced
computer aided design techniques to create forced air, directional
voice coil cooling for high power & efficiency. Finite element
analysis was used to optimize the suspension & magnetic structure
for long, linear travel to provide low distortion & greater LF
extension. These features & details, such as forged magnetic
components & special materials, provide reliability w/a 500W
power rating in a lightweight transducer. Next is the ND2, a 2-inch
voice coil compression driver based on neodymium motor structure
to allow for maximum output while reducing size & weight to a
minimum. Its precision phasing plug & titanium diaphragm provide
better HF performance, while the integral heatsink provides cooling
for high power output.
The high tech enclosure uses injection-molded high-impact
polypropylene structural foam to make the Zx5 incredibly durable.
The enclosure geometry elements have been carefully designed to
provide maximum rigidity & bass response. By design the Zx5 is
also a perfect solution for stage monitors by allowing two angles
(45° or 55°) without any additional accessories.
Two coverage patterns are available; 60° x 60° coverage for longthrow
and cluster applications, 90° x 50° coverage for wider coverage
or shorter distances.
The Zx5 is equipped w/three anchor plates for rigging w/single
stud-fittings, along w/two more possible anchor plate attachment
points on the bottom. For permanent suspension or attaching
brackets, the Zx5 also has two M8 inserts on the top & bottom,
two under the handle, & four on the back of the enclosure, for a
total of 10. All versions are available in black or white.
* Freq. Response1(-3 dB): 58 Hz - 18 kHz
* Freq. Range1(-10 dB): 39 Hz - 20 kHz
* Rec. Hipass Frequency: 36 Hz
* Axial Sensitivity: 98 dB (1W/1m)
* Max Calculated SPL: 132 dB
* Horizontal Coverage: 90°
* Vertical Coverage: 50°
* Rated System Power: 600W Continuous, 2400W Peak
* LF Power Handling: 500W Continuous, 2000W Peak
* HF Power Handling: 40W Continuous, 160W Peak
* LF Transducer: DVX3150, 15in (300mm) Driver
* HF Transducer: ND2, 1in. (25.4mm) exit Neodymium
* Compression Driver
* Crossover Frequency: 1.5 kHz
* Nominal Impedance: 8 Ohms
* Minimum Impedance: 6.5 Ohms
* Connectors: Neutrik Speakon NL4
* Enclosure Material: Polypropylene Structural Foam
* Suspension: Enclosure has locations for 5 SingleStud
* Attatchment Plates & 10 Forged
* Steel Eyebolts - 2 on Top, 2 on Bottom,
* 2 on Side, & 4 on Rear of Enclosure
* Grille: Polyester Powder Coated, 16GA
* Galvanized Steel
* Environmental Spec: IEC 529 IP24 / IP44 (PI Version)
* Dim (H x W x D): 27.26" x 17.57" x 16.16"; (692mm x 446mm x 411mm)
* Net Weight: 49 lbs (22.2 kg)
* Shipping Weight: 57.4 lbs (26.0 kg)
Quick Info and Policies:
- Same day shipping on most orders.
- 30 day defective item return policy.
- Low flat rate shipping charges.
- 45 day refund return policy.
- 7%% sales tax applies to NJ residents only.
- Security encryption to protect customer data.
THE PRICE BELOW IS NOT THE ACTUAL PRICE OF THIS ITEM. The actual price is LOWER! The manufacturer of this item has a Minimum Advertised Price (MAP) policy that we adhere to. In other words, we cannot advertise this product at a price lower than the MAP set by the manufacturer. However, we can ultimately sell the product at any price that we choose. Since we are a high volume dealer and are able to maintain our overhead costs low, our actual prices are always lower than manufacturer MAP prices (many times, MUCH LOWER). You can e-mail us at Sales@BSless.com or call us for actual pricing. When e-mailing or calling, please be sure to note the item code located to the left of the price. We apologize for any inconvenience.
|
